Product Description
Hot-tub bathing that can change location · Trailer-based hot-tub system
Mobile Wood Fired Hot Tub on Trailer – TimberIN Nordic Mobile™: a trailer-based system for events, rentals and mobile hospitality
Mobility changes the engineering brief
A mobile hot tub must work both as a bathing installation and as a load carried between sites. Diameter, water volume, cladding, heater position and optional equipment all influence balance and completed mass. The tub is transported empty and then needs a safe process for positioning, levelling, filling, heating and draining at each venue. An external stove preserves bathing room but widens the operating zone; an internal or integrated arrangement changes weight distribution and firebox access. These are operational choices, not styling details to decide after the trailer is built.
Tub capacity is documented; road-going mass is configuration-specific
Nordic Mobile is based on the polypropylene hot-tub family, so the shell data can be compared by diameter. What the family sheet cannot do is certify the completed trailer. Heater position, bench construction, cover, spa equipment, cladding and chassis all change mass and balance. The tub must travel empty, and the final trailer plate, axle limits and supplied documents—not the shell table—decide whether a tow vehicle and driver may move it.
| 1,600 mm shell | 4–6 bathers; approximately 1,800 L; 1,920 mm top outside diameter; approximately 200 kg tub |
|---|---|
| 1,800 mm shell | 6–8 bathers; approximately 2,280 L; 2,120 mm top outside diameter; approximately 250 kg tub |
| 2,000 mm shell | 8–10 bathers; approximately 2,800 L; 2,320 mm top outside diameter; approximately 280 kg tub |
| 2,200 mm shell | 10–12 bathers; approximately 3,400 L; 2,520 mm top outside diameter; approximately 300 kg tub |
| Shell height | Approximately 1,040 mm before optional bottom insulation |
| Road weight | Not the same as tub dry weight; final completed plated mass required |
| Operating rule | Transport empty; level and stabilise before filling |
Diameter, benches and stove position determine whether the trailer is practical
Closed polypropylene benches can reduce family-sheet water volume by about 25%, useful where trailer payload and heat-up matter; open benches retain access and a lighter visual feel. An external stove preserves seating but expands the safety zone at each venue and must be secured for travel. An integrated heater gives a compact operating outline but ties servicing closely to the shell. A snorkel heater keeps outside space clear while taking room in the water. Choose the smallest diameter that meets normal bookings, then have the chassis and axle specification calculated around that exact build.
| Decision | Choices currently selectable |
|---|---|
| Inner diameter | 1600 mm · 1800 mm · 2000 mm · 2200 mm |
| Stoves | External wood-fired stove, 316-grade steel, chemical resistant · Integrated (316) stainless steel 35 kW wood fired heater (PP) · No heater · Snorkel wood-fired, 316-grade steel, chemical resistant |
Heating at events: plan around the selected shell and turnaround window
The generic 2–3 hour warm-season and 4–6 hour cold-season wood-fired guidance is not a booking guarantee, especially across 1,800 to 3,400 litres. A 2,200 mm tub can hold almost twice the water of the 1,600 mm shell. Water supply temperature, heater output, dry fuel, wind and cover discipline must be built into the event schedule, with time for safe cool-down and complete drainage before travel. Commercial operators should record actual performance after commissioning and publish conservative guest-ready times.
Build a repeatable setup routine for every destination
Check tow-vehicle suitability, licence, insurance, registration, coupling, axle limits and road dimensions against the final supplied documents and local requirements. At the destination, use firm level ground that can carry the trailer, water and bathers without movement. Establish safe zones around the firebox and chimney, prevent public access to hot surfaces and control where several hundred litres of water will drain. Commercial operators should also document cleaning, water treatment, inspection and cool-down procedures so the experience remains consistent between bookings.
Before production: TimberIN products are individually made, so published measurements are approximate. Confirm the selected live variation, final dimensions, included equipment, service requirements, delivery method and any critical tolerances in the accepted written quotation. Photographs may show optional equipment.
Questions about Mobile Wood Fired Hot Tub on Trailer – TimberIN Nordic Mobile™
What inner diameter choices are shown for Mobile Wood Fired Hot Tub on Trailer – TimberIN Nordic Mobile™?
Inner diameter choices currently shown are 1600 mm; 1800 mm; 2000 mm; 2200 mm. Availability and valid combinations are controlled by the live configurator and confirmed in the final written order.
Does the displayed price include every option for Mobile Wood Fired Hot Tub on Trailer – TimberIN Nordic Mobile™?
Not necessarily. The displayed amount follows the current base or selected configuration. Size, material, heater, equipment, delivery and installation choices can change the total; the basket, quotation or written order is the final commercial record.
What should be confirmed before delivery of Mobile Wood Fired Hot Tub on Trailer – TimberIN Nordic Mobile™?
Choose diameter and heater position together because water volume, equipment and seating change the completed trailer load. Confirm safe filling, draining, levelling, firebox access and chimney setup for every intended operating location. Use the final supplied trailer and build documents—not the web-page summary—to confirm towing, registration and road-use requirements. Final dimensions, included equipment and site responsibilities should be confirmed before production or dispatch.
Reviews
There are no reviews yet